Monday, 16 November 2020

Profit of Seawall Repair and reinforcement

If you live along Sarasota, you likely have a seawall, sometimes referred to as a break wall. Seawalls prevent flooding and are used to deter shore erosion, which can eat away at the land and cause extreme damage to roads, homes and other buildings. Commonly made from concrete, seawalls are highly susceptible to falling and/or cracking due to the high-impact energy derived from the waves. In fact, one of our biggest void filling jobs at AtkinMarine Service. 

Understand the of profit seawall repair and reinforcement from Mr. Atkin can provide a solution to help you save money and protect your property.


Profitsof Seawall Repair

Rather than replacing your seawall, you’re truly better off repairing it. While this may seem like a short-term solution, AtkinMarine Service Inc agrees that seawall repair makes the most sense. There are several advantages of seawall repair, including:

  • Seawalls help protect your property against storm surge flooding by providing a barrier between water and land. Without the concrete barrier, your home, roads and property are open to flooding during bad storms. Seawall repair is usually cheaper than dealing with the consequences of flooding.
  • Maintaining a seawall is an ongoing project, but when it’s regularly maintained and repaired, it should last about 20 to 30 years. Most seawall repair projects can be completed within a single day.

Fixa Falling Seawall

Meaningful when to repair your seawall is important. You should from time to time inspect your seawall for any defects, especially after a full-size storm. If you find any of the following signs, call a specialist for an evaluation:

  • Are there any cracks or pieces broken off of the cap?
  • Are any of the slabs beginning to deteriorate?
  • Are any of the concrete slabs leaning?
  • Is your property losing soil behind the wall?

Once damage is visible, there’s a small window of time for seawall repair. You’ll want to call Mr. Atkin right away. Mr. Atkin leveling process utilizes eco-friendly polyurethane foam injected into the concrete. The polyurethane foam expands in 15 seconds and can reach two to three feet deep, so we can spray into really deep crevices, creating a more reinforced wall. As a result of our polyurethane leveling process, we will:

  • Displace standing water
  • Fill voids
  • Fill cracks
  • Regenerate a watertight barrier

How much does it cost to repair and reinforcement a seawall?

Repairing your seawall with Mr. Atkin leveling is about half the cost of replacing the concrete seawall entirely and is great for adding reinforcement. Contact Atkin to request a free quote today.

 



Thursday, 5 November 2020

Successful Dock Piling Services for Your Dock

For any marine project, one of the most important parts is the piling. Wood pilings that are densely covered with marine increase can be structurally broken. The amount of broken can be secret which is why it becomes even more complicated to know if the dock piling needs to be repaired or not. Dock Pilings go deep surrounded by waterway and being the very first step in the construction of a dock, everything depends upon them. Constant exposure to water makes the dock pilings subject to broken.


Regular dock inspection, maintenance, and repair are extremely important for the docks to stay in healthy shape and this is why it is essential for you to get the best dock piling inspection service in Sarasota. And what’s better than getting these services from your very own professionals at AtkinMarine Service Inc? Atkin are here to offer you a inclusive range of marina construction services for the complete organization of dock pilings.

Right from all over inspection of the docks and underlying broken, to offering the solution to the primary broken, we undertake the whole thing to carry your dock pilings in the best shape, AtkinMarine Service Inc Company is here for you with our best dock piling repair in Sarasota.

  • Protect Pilings with Smart Techniques 

As we’ve understood that dock pilings need to be protected at all costs, we introduce a singular set of services that confirm that your docks are protected from any further broken. If you’ve recently installed dock pilings, we’ve just the proper solution for you. We extend effective dock piling wrap in Sarasota in order to protect the just now introduced dock pilings. 

Incessant exposure to water and organisms makes dock pilings prone to infestation and this is the very beginning of a future broken. This can be averted totally by introducing piling wrap. With the help of piling wrap, any future damage can be minimized to a great extent. 

A lot of times, people do not notice the first signs of broken and keep on ignoring them till it is too late for any repair work to be done. In order to dodge any such difficulty, dock piling inspections are of great help. We at AtkinMarine Service Inc company offer regular dock piling inspection service in Sarasota so that you know what level of broken has been done to your dock pilings. After the broken is inspected, rightful solution is provided for the same. 

  • Technically Brilliant Piling Restoration Workers 

Dock pilings, being one of the most integral parts of any marina construction, should be handled efficiently and with care. We implement numerous tools and techniques to ensure that any damage done to the dock pilings is restored and is restored with the maximum efficiency. 

Whether it is about dock piling wrap in Sarasota or if it is about the dock piling inspection, we ensure that every step is undertaken seriously and handled with utmost diligence. Our team of professionals works through the project steadily to extend only the best services for your docks. 

For your dock repair and restoration, get in touch with AtkinMarine Service Inc Company and get prompt assistance for your next project.




Thursday, 25 June 2020

Do You Need Seawall Repair or Replacement?

Regular inspection of your seawall for signs of damage will help determine if yours needs repairs or possible replacement.


Look for the following to help determine if your seawall needs work.

Cracks in the Seawall Cap or Seawall

Cracks in the seawall cap or seawall could lead to exposure of the steel rebar reinforcement in your wall. Exposure of the rebar could lead to corrosion and possible failure of your seawall. If you see signs of possible exposure and/or corrosion it would be a good time to a seawall repair company. It could be early enough to repair the seawall and mitigate further damage that could lead to possible failure and a much more expensive replacement of your seawall.

Missing Chunks or Voids in the Seawall

Voids in the seawall could have been caused by cracks in the concrete. Cracks can lead to the erosion of concrete and possible failure of the seawall. A seawall missing large chunks of concrete should be inspected immediately in order to access the level of damage to the seawall.

Large or Widening Voids Between Seawall Slabs

If you see a gap between seawall slabs that is significantly larger than the other gaps between slabs, or the gaps appear to be widening in general, this could be a sign that the joints have weakened or broken. It is usually caused by anchors failing, which can lead to the seawall cap cracking and/or significant damage to seawall slabs.


Cracks, Bowing, Leaning In or Out, or Crooked Seawall

Seawall slabs are under constant stress and pressure. A pressure imbalance can lead to a slab cracking, bowing, leaning, or becoming misaligned. And if the slab is not repaired or replaced, and the pressure balance restored, the slab(s) can buckle resulting in a partial or complete sudden seawall failure.
 

Rust Stains on the Seawall

Rust stains can occur if the steel reinforcement structure in your seawall has been exposed to water. The rust stains could be signs of the erosion of the support structure holding your seawall together. If you can’t easily track the source of the rust to a nonessential feature of the seawall, especially if you are unfamiliar with the seawall’s maintenance history – you should contact a professional to have the seawall inspected.

Settled Soil or Sink Holes Along the Seawall
 

Soil settling or holes in the ground along or near your seawall are signs of erosion. Erosion is another common cause of a pressure imbalance, that can lead to slab damage and potential seawall failure. Call a professional seawall repair company right away to assess the problem and make repairs before seawall failure occurs. 

Seawall Slab Damage is the Leading Cause of Sudden Seawall Failure

If you see any signs of a seawall pressure imbalance, call a seawall construction company immediately. Repairing a damaged slab is much more affordable than having to replace a seawall that has failed.

It is a good habit to check for seawall erosion, especially after major storms, and especially for aged seawalls. It is not always easy to know what to look for when everything looks good from what you can visually see. It is a good idea to hire a professional, at least once per year, to inspect your seawall.


Atkin Marine Services Inc is your one stop shop for all of your seawall repair and replacement needs in Sarasota, Florida. Contact us today about any signs of seawall damage you see and ask for a free consultation.

Monday, 8 July 2019

Know About Different Types Of Boat Docks


Thinking of installing a boat dock but confused about the type of dock you want? Take a look at this guide and get sorted!

With a plethora of boat dock options available these days, it often becomes difficult to take the correct decision. However, considering various factors such as type of watercraft you own, budget, etc. can help you make the right choice.

Let’s take a look at some of the different types of boat docks:

Piling Dock

If you want a build a dock on your lake, piling dock is the best option. They are built by drilling pilings also known as wooden beams, deep into the lake bed. Piling dock acts as a wooden walkway and is sturdy as well as stable. It can be built in high-flow areas such as rivers and streams as the chances of getting washed away by floodwaters are quite less.  It is the best option if you have larger boats.

Floating Dock

Floating docks are versatile and consist of an anchored floating platform on which the wooden platform is built. They serve as a boat dock even though they float on the water’s surface. These floating docks cost less as compared to piling dock. Another advantage of a floating dock is that it automatically rises and falls according to the lake level. If you have a smaller boat particularly fishing boat, you must opt for a floating dock.

Crib docks

Crib docks are very heavy and sturdy structures built by filing a framework with rocks or stones. If you are extending your shoreline out in the water, crib docks are the best option for you. However, they are expensive as compared to other docks.

Suspension docks

They work as a suspension bridge and consist of a metal framework. One of the major advantages of building a suspension dock is that it works best for the fragile ecosystems, causing a minimal impact on the flora and fauna. You can get them built in attractive and elegant designs. But, they are expensive as compared to other docks.

Boat lift

A boat lift helps to elevate your boat out of water when not in use. It can help to prevent wear and tear on the boat, thus enhancing longevity.

If you are looking for a boat dock, get in touch with AtkinMarine Services, Inc. We will understand your requirements and construct a boat dock accordingly.

Saturday, 22 June 2019

Reasons Why You Need a Boat Lift


Thinking of storing your boat in the water? Reconsider your thought! Believe it or not, storing your boat in water can lead to long-term damage. Worried about the solution? Install a boat lift and extend the lifespan of your boat. Boat lift installation will not only help to prevent deterioration but also make boarding more convenient. It will help to make your boarding experience seamless and hassle-free. 

Let’s take a sneak-peak into the reasons why you need a boat lift 

Prevents corrosion

When you leave your boat constantly in water, it might cause several problems, reducing the lifespan of your boat. It can lead to blistering and corrosion.  However, with a boat lift, these problems can be easily solved as your boat is kept out of water when not in use.  This prevents the accumulation of grime on the boat.

Provides protection against damages 

Most of the boats are tied to the pier, causing the rough waters to push against the dock. In unfavorable weather conditions, it can worsen the situation.  This is where a boat lift steps in! It helps to provide protection against knocking and grinding. A boat lift can be quite useful in winters as well as it helps to prevent dents or scuffs caused due to ice scraping on the boat. 

Experience safer boarding

Change in the water levels, high stormy winds and other conditions can often cause problems in the movement of the boat.  With a boat lift, you set up a stable foundation to help you board your boat more safely and easily. 

If you are looking for the best boat lift installation services, get in touch with Atkin Marine Services Inc. We will help you choose the best boat lift that fits your specific requirements. Our professionals will always be there to solve your queries or doubts related to boat lift installation

Profit of Seawall Repair and reinforcement

If you live along Sarasota, you likely have a seawall, sometimes referred to as a break wall. Seawalls prevent flooding and are used to dete...